CE
1、 Introduction to CE certification

CE mark is a kind of product safety certification mark. CE stands for conformity Europe. In the EU market, CE is compulsory certification, and products conforming to CE certification can be freely circulated in EU Member States.
CE certification is applicable to Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain and Sweden. In addition, some other countries also recognize CE certification.
2、 Significance of CE certification
1. It is necessary to apply for CE certification, which must be handled when products are exported to Europe.
CE certification is the pass for products to enter the market of EU and European Free Trade Area countries.
CE certification indicates that the product has met the safety requirements of EU directive;
CE certification is a kind of promise of enterprises to consumers, which increases consumers' trust in products; products with CE mark will reduce the risk of sales in European market.
2. Benefits of applying for CE certification
The EU's laws, regulations and harmonised standards are not only large in number but also very complex in content. Therefore, it is a wise move to obtain the assistance of the designated institutions of the EU, which can save time, effort and reduce risks;
By obtaining the CE certificate from the EU designated agency, the trust of consumers and market supervision agencies can be obtained to the greatest extent;
It can effectively prevent the appearance of irresponsible accusations, and will become technical evidence with legal effect.
3、 CE certification mark
The CE mark is the manufacturer's mark of conformity indicating compliance with all current directives.
The size of the CE mark in European market has regulations on packaging, in which the height of CE character shall be at least 5mm, the total length of CE word shall not exceed 12mm, and the width of CE font shall not be less than 1 / 5. The thickness should be at least 1 / 5 of the height (at least 20 × 1 / 5 = 4mm) as shown in the figure, and the peripheral radius should be 10mm
The inner cross column shall have at least 80% of the peripheral radius (10 × 0.8 = 8mm)
Warnings and precautions printed in local market text. Name, trademark and address of manufacturer or authorized agent and importer. CE in accordance with the regulations.